Kenya vs North Macedonia: Crude steelmaking capacity
Crude steelmaking capacity over time
- Kenya
- North Macedonia
How they compare
Kenya currently reports 0.645 Tonnes against 0.5 Tonnes in North Macedonia, a difference of 0.145 Tonnes.
That makes Kenya's figure about 1.3 times North Macedonia's.
The two have swapped places 1 time across 26 shared years of data; in 2000 it was North Macedonia ahead.
Kenya ranks 67th and North Macedonia ranks 69th of 115 countries.
Across the 3 decades both report, Kenya averaged higher in 2 and North Macedonia in 1.
Head to head by decade
| Decade | Kenya | North Macedonia | Difference | Ahead |
|---|---|---|---|---|
| 2000s | 0.37 Tonnes | 0.5 Tonnes | 0.13 Tonnes | North Macedonia |
| 2010s | 0.592 Tonnes | 0.5 Tonnes | 0.092 Tonnes | Kenya |
| 2020s | 0.645 Tonnes | 0.5 Tonnes | 0.145 Tonnes | Kenya |
Averages of every year both report within each decade.
Frequently asked questions
- Which has higher crude steelmaking capacity, Kenya or North Macedonia?
- Kenya, at 0.645 Tonnes against 0.5 Tonnes in North Macedonia as of 2025.
- What is the difference in crude steelmaking capacity between Kenya and North Macedonia?
- 0.145 Tonnes, with Kenya ahead.
- How many years of comparable data are there for Kenya and North Macedonia?
- 26 years are reported by both, from 2000 to 2025.
- How do Kenya and North Macedonia rank globally for crude steelmaking capacity?
- Kenya ranks 67th and North Macedonia ranks 69th of 115 countries.
- Where does this data come from?
- Organisation for Economic Co-operation and Development, published as Crude steelmaking capacity. Statizoid refreshes it automatically from the source and publishes the full history for both places.
Individual pages
About this data
This dataset provides information on crude steelmaking capacity for 132 OECD Member countries and non-OECD economies over the period 2000–2025. Definitions Steelmaking capacity Nominal crude steelmaking capacity is defined as the maximum theoretical output of installed steelmaking equipment. This definition does not account for yield losses, maintenance downtime, or other factors affecting actual production. As a result, the steelmaking capacity figures provided by the OECD should not be interpreted as effective capacity. Capacity is expressed in million metric tonnes (mmt). Annual capacity figures reflect all steelmaking capacity existing at the end of each calendar year. Steelmaking equipment Steelmaking equipment includes all equipment used to produce crude steel. The definition excludes ironmaking equipment, which is considered upstream, as well as casting, rolling, and finishing equipment, which are considered downstream. Specifically, crude steelmaking equipment includes electric arc furnaces (EAF), induction furnaces (IF) and LD basic oxygen furnaces (BOF). Methodology Steelmaking capacity developments are derived from data on existing capacity, investments, and closures. Capacity changes reflect new additions and permanent closures and therefore represent net changes. In some cases, capacity may be overestimated due to the assumption that projects classified as underway with expired start dates have become operational. Only permanent closures are included in capacity calculations, although some closures cannot be clearly classified due to limited available information. Data sources OECD calculations based on desk research, company websites, publicly available news sources and information exchanges within the OECD Steel Committee. Cite this dataset OECD (2025). Crude steelmaking capacity dataset. Accessed on [Day Month Year]. Further information OECD Steel Outlook 2025 OECD Steel Committee Global Forum on Steel Excess Capacity For questions or comments regarding this dataset, please contact Maika Sakamoto (Maika.SAKAMOTO@oecd.org) or Masanobu Nakamizu (Masanobu.NAKAMIZU@oecd.org).