Crude steelmaking capacity in Trinidad and Tobago
Trinidad and Tobago: Crude steelmaking capacity was 0 Tonnes in 2025. ◆ Volatile
Crude steelmaking capacity in Trinidad and Tobago, 2000–2025
Source: Organisation for Economic Co-operation and Development. Measured in Tonnes.
Analysis
The most recent figure for crude steelmaking capacity in Trinidad and Tobago is 0 Tonnes, measured in 2025. That is the lowest value across all 26 years on record.
That represents a change of down 100.0% over ten years.
Over the whole period, crude steelmaking capacity in Trinidad and Tobago peaked at 1 Tonnes in 2000 and was at its lowest, 0 Tonnes, in 2016.
Trinidad and Tobago ranks 97th of 115 countries on this measure, in the bottom quarter.
The series is highly variable year to year, so single readings are best treated with caution.
Averages by decade
| Decade | Average | Lowest | Highest | Years |
|---|---|---|---|---|
| 2000s | 1 Tonnes | 1 Tonnes | 1 Tonnes | 10 |
| 2010s | 0.6 Tonnes | 0 Tonnes | 1 Tonnes | 10 |
| 2020s | 0 Tonnes | 0 Tonnes | 0 Tonnes | 6 |
Countries ranked near Trinidad and Tobago
- 94 Uganda 0.072 Tonnes compare
- 95 Sudan 0.06 Tonnes compare
- 96 Mauritius 0.01 Tonnes compare
- 97 Costa Rica 0 Tonnes
- 97 Denmark 0 Tonnes compare
- 97 Iceland 0 Tonnes
- 97 Ireland 0 Tonnes
- 97 Afghanistan 0 Tonnes
- 97 Bhutan 0 Tonnes
- 97 Cambodia 0 Tonnes
- 97 Côte d’Ivoire 0 Tonnes
- 97 Cyprus 0 Tonnes
- 97 Hong Kong (China) 0 Tonnes
- 97 Kyrgyzstan 0 Tonnes
- 97 Malta 0 Tonnes
- 97 Mozambique 0 Tonnes
- 97 Namibia 0 Tonnes
- 97 Panama 0 Tonnes
- 97 Puerto Rico 0 Tonnes
- 97 Tanzania, United Republic of 0 Tonnes
- 97 Togo 0 Tonnes
More urban development data for Trinidad and Tobago
- Population in the largest city 74.0% (2025)
- Population density 266.57 people per sq. km of land area (2023)
- PM2.5 air pollution, mean annual exposure 13.78 micrograms per cubic meter (2023)
- Population in largest city 546,564 (2025)
- Africa's Development Dynamics (AfDD) Table 23 - Ecological 15.11 Hectares (2020)
- PM2.5 air pollution, population exposed to levels exceeding WHO 100.0% (2017)
Frequently asked questions
- What is crude steelmaking capacity in Trinidad and Tobago?
- Crude steelmaking capacity in Trinidad and Tobago was 0 Tonnes in 2025, according to Organisation for Economic Co-operation and Development.
- What is the highest crude steelmaking capacity recorded in Trinidad and Tobago?
- The highest recorded value was 1 Tonnes in 2000.
- What is the lowest crude steelmaking capacity recorded in Trinidad and Tobago?
- The lowest recorded value was 0 Tonnes in 2016.
- How does Trinidad and Tobago rank for crude steelmaking capacity?
- Trinidad and Tobago ranks 97th out of 115 countries with data for 2025.
- Is crude steelmaking capacity rising or falling in Trinidad and Tobago?
- Over the last ten years it is down 100.0%. The long-run trend across the full record is volatile.
- Where does this Trinidad and Tobago data come from?
- The figures come from Organisation for Economic Co-operation and Development, published as part of Crude steelmaking capacity. Statizoid updates them automatically from the source API.
Download this data
CSV · JSON — 26 observations, free to reuse under OECD Terms and Conditions (attribution required).
About this data
This dataset provides information on crude steelmaking capacity for 132 OECD Member countries and non-OECD economies over the period 2000–2025. Definitions Steelmaking capacity Nominal crude steelmaking capacity is defined as the maximum theoretical output of installed steelmaking equipment. This definition does not account for yield losses, maintenance downtime, or other factors affecting actual production. As a result, the steelmaking capacity figures provided by the OECD should not be interpreted as effective capacity. Capacity is expressed in million metric tonnes (mmt). Annual capacity figures reflect all steelmaking capacity existing at the end of each calendar year. Steelmaking equipment Steelmaking equipment includes all equipment used to produce crude steel. The definition excludes ironmaking equipment, which is considered upstream, as well as casting, rolling, and finishing equipment, which are considered downstream. Specifically, crude steelmaking equipment includes electric arc furnaces (EAF), induction furnaces (IF) and LD basic oxygen furnaces (BOF). Methodology Steelmaking capacity developments are derived from data on existing capacity, investments, and closures. Capacity changes reflect new additions and permanent closures and therefore represent net changes. In some cases, capacity may be overestimated due to the assumption that projects classified as underway with expired start dates have become operational. Only permanent closures are included in capacity calculations, although some closures cannot be clearly classified due to limited available information. Data sources OECD calculations based on desk research, company websites, publicly available news sources and information exchanges within the OECD Steel Committee. Cite this dataset OECD (2025). Crude steelmaking capacity dataset. Accessed on [Day Month Year]. Further information OECD Steel Outlook 2025 OECD Steel Committee Global Forum on Steel Excess Capacity For questions or comments regarding this dataset, please contact Maika Sakamoto (Maika.SAKAMOTO@oecd.org) or Masanobu Nakamizu (Masanobu.NAKAMIZU@oecd.org).