Crude steelmaking capacity in Türkiye
Türkiye: Crude steelmaking capacity was 59.9 Tonnes in 2025. ▲ Rising
Crude steelmaking capacity in Türkiye, 2000–2025
Source: Organisation for Economic Co-operation and Development. Measured in Tonnes.
Analysis
The most recent figure for crude steelmaking capacity in Türkiye is 59.9 Tonnes, measured in 2025. That is the highest value across all 26 years on record.
The figure is up 1.5% on the previous year and up 10.9% over ten years.
Over the whole period, crude steelmaking capacity in Türkiye peaked at 59.9 Tonnes in 2025 and was at its lowest, 27.2 Tonnes, in 2000.
The long-run direction has been consistently rising across the 26 years of available data.
Averages by decade
| Decade | Average | Lowest | Highest | Years |
|---|---|---|---|---|
| 2000s | 32.2 Tonnes | 27.2 Tonnes | 41.24 Tonnes | 10 |
| 2010s | 52.08 Tonnes | 42.7 Tonnes | 55.91 Tonnes | 10 |
| 2020s | 56.48 Tonnes | 53.4 Tonnes | 59.9 Tonnes | 6 |
Countries ranked near Türkiye
More urban development data for Türkiye
- Africa's Development Dynamics (AfDD) Table 23 - Ecological 671.21 Hectares (2020)
- Dollar value of all resources made available to strengthen 3.07 million (2023)
- Housing cost overburden rate by NUTS 2 region 10 (2025)
- Wagons and their load capacity by type of wagons 17,684 (2024)
- Housing cost overburden rate by age, sex and poverty status 10 (2025)
- Average number of rooms per person by tenure status and dwelling type 1.1 (2025)
- At-risk-of-poverty rate after deducting housing costs by age and sex 32.9 (2025)
- Total housing costs in pps 310.6 (2025)
- Median of the housing cost burden distribution by age, sex and 7.8 (2025)
- Housing cost overburden rate by tenure status 10 (2025)
Frequently asked questions
- What is crude steelmaking capacity in Türkiye?
- Crude steelmaking capacity in Türkiye was 59.9 Tonnes in 2025, according to Organisation for Economic Co-operation and Development.
- What is the highest crude steelmaking capacity recorded in Türkiye?
- The highest recorded value was 59.9 Tonnes in 2025.
- What is the lowest crude steelmaking capacity recorded in Türkiye?
- The lowest recorded value was 27.2 Tonnes in 2000.
- How does Türkiye rank for crude steelmaking capacity?
- Türkiye ranks 3rd out of 14 groups with data for 2025.
- Is crude steelmaking capacity rising or falling in Türkiye?
- Over the last ten years it is up 10.9%. The long-run trend across the full record is rising.
- Where does this Türkiye data come from?
- The figures come from Organisation for Economic Co-operation and Development, published as part of Crude steelmaking capacity. Statizoid updates them automatically from the source API.
Download this data
CSV · JSON — 26 observations, free to reuse under OECD Terms and Conditions (attribution required).
About this data
This dataset provides information on crude steelmaking capacity for 132 OECD Member countries and non-OECD economies over the period 2000–2025. Definitions Steelmaking capacity Nominal crude steelmaking capacity is defined as the maximum theoretical output of installed steelmaking equipment. This definition does not account for yield losses, maintenance downtime, or other factors affecting actual production. As a result, the steelmaking capacity figures provided by the OECD should not be interpreted as effective capacity. Capacity is expressed in million metric tonnes (mmt). Annual capacity figures reflect all steelmaking capacity existing at the end of each calendar year. Steelmaking equipment Steelmaking equipment includes all equipment used to produce crude steel. The definition excludes ironmaking equipment, which is considered upstream, as well as casting, rolling, and finishing equipment, which are considered downstream. Specifically, crude steelmaking equipment includes electric arc furnaces (EAF), induction furnaces (IF) and LD basic oxygen furnaces (BOF). Methodology Steelmaking capacity developments are derived from data on existing capacity, investments, and closures. Capacity changes reflect new additions and permanent closures and therefore represent net changes. In some cases, capacity may be overestimated due to the assumption that projects classified as underway with expired start dates have become operational. Only permanent closures are included in capacity calculations, although some closures cannot be clearly classified due to limited available information. Data sources OECD calculations based on desk research, company websites, publicly available news sources and information exchanges within the OECD Steel Committee. Cite this dataset OECD (2025). Crude steelmaking capacity dataset. Accessed on [Day Month Year]. Further information OECD Steel Outlook 2025 OECD Steel Committee Global Forum on Steel Excess Capacity For questions or comments regarding this dataset, please contact Maika Sakamoto (Maika.SAKAMOTO@oecd.org) or Masanobu Nakamizu (Masanobu.NAKAMIZU@oecd.org).